jsock
Member
I am new to VMs so excuse my lack of knowledge.
I am trying to connect to a Micro 820 thru Connected Workbench/RS Linx using my VM.
What Ethernet adapter (local pc or VM) do i change to PLC network.
My local PC shows 3 connections:
Ethernet
VMnet1
VMnet8
On my VM i have 2 connections showing Bridged and NAT.
In my virtual network settings i show VMnet0 (Bridged)
VMnet1 (Host Only) 192.168.131.0
VMnet8 NAT 192.168.78.0
My PLC is on 10.0.6.10
Any help is appreciated
I am trying to connect to a Micro 820 thru Connected Workbench/RS Linx using my VM.
What Ethernet adapter (local pc or VM) do i change to PLC network.
My local PC shows 3 connections:
Ethernet
VMnet1
VMnet8
On my VM i have 2 connections showing Bridged and NAT.
In my virtual network settings i show VMnet0 (Bridged)
VMnet1 (Host Only) 192.168.131.0
VMnet8 NAT 192.168.78.0
My PLC is on 10.0.6.10
Any help is appreciated