Westfalia PLC ??

bluenoser337

Member
Join Date
Apr 2003
Location
Nova Scotia
Posts
391
Two Westfalia-Separator PLCs just landed on my desk for evaluation...not something I've ever seen before. They are used on a ship to operate oil separators...hence the brand. They are identified as Type PLC 100/3(C) Nr.31907324. The unit is a PLC and OP all in one. There is a slot in the back for a memory cassette, but I don't have those. When one unit is powered up, the "F-Key" LEDs all come on steady and the display does not illuminate. When the other unit is powered up all the LEDs flash rapidly, and the internal relay operates at the same rate. I need to determine if these are functional. Anybody have any info on these? The guts of the unit doesn't reveal any PLC brand names. It is a German made unit filled with RIFA relays and chips from Motorola, Toshiba, Hyundai, and Philips.
 
Westfalia Separator Canada, Inc.
835 Harrington Court
Burlington ON L7N 3P3, Canada
Tel.: +1/905/319-3900
Fax: +1/905/319-3903
eMail: [email protected]
Internet: www.gea-westfalia.ca
 

Similar Topics

We got a couple of Purifiers onboard and the automatic system is out of date. Anyone have a plc program for this?
Replies
2
Views
2,428
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
7
Views
161
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
94
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
92
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
62
Back
Top Bottom