sinanmoral
Member
I am an Electric Engineer working as a maintenance engineer and manage some technician on the production hall now but in the past, I mostly focus on low and high voltage electric distribution system, therefore, my knowledge is limited over Plc system but I can do dowland or upload, some basic edit, watching program e.t.c
Now I am looking at rslogix500(slc 500) due to new my maintenance job and it is so understandable, it seems easy to learn.at the same time, I am looking at Rslogix5000 and studio 5000 that seems so complex and diffucult.
My plan to improve my knowledge is first look at rslogix500.
Am I right? what is your recommendation?
Note: All machine in the plant uses Ab plc (Plc5,Slc500,controllogix, powerflex ac driver,kinetix servo driver but mostly slc500 about 60 pcs)
Also except ladder, there is no other program language.
Now I am looking at rslogix500(slc 500) due to new my maintenance job and it is so understandable, it seems easy to learn.at the same time, I am looking at Rslogix5000 and studio 5000 that seems so complex and diffucult.
My plan to improve my knowledge is first look at rslogix500.
Am I right? what is your recommendation?
Note: All machine in the plant uses Ab plc (Plc5,Slc500,controllogix, powerflex ac driver,kinetix servo driver but mostly slc500 about 60 pcs)
Also except ladder, there is no other program language.