Hi,
Im having a little problem with block related messages.
When i start the visualization after the PLC is started, then the alarms that are already active don't show in the alarm window, it wil only show when the status has changed from 1 to 0 and back to 1. Afterwards the problem is gone.
Is there any way to initialize the alarms when the runtime is started?
I use SFC17 blocks.
Tnx in advance
Nico
Im having a little problem with block related messages.
When i start the visualization after the PLC is started, then the alarms that are already active don't show in the alarm window, it wil only show when the status has changed from 1 to 0 and back to 1. Afterwards the problem is gone.
Is there any way to initialize the alarms when the runtime is started?
I use SFC17 blocks.
Tnx in advance
Nico