[email protected]
Guest
O
Hello
I just finished a job for a customer:wonderware in touch 7.1 + PLC Momentum 171CCC96030-IEC in a MACO DS controller. The Racksystem runs on Modbus+, the I/O mostly on Interbus S and some data are transfered
via Ethernet to increase the transfer rate. This is the first time I realized a controller with this setup. Now the customer asked me to show different signals like alarm messages in his office. I am thinking about using the ethernet to show little red, gree, and blue bulbs on his computer (in a small application). I never did this before and now I am wondering, if somebody knows how this can be done over the ethernet (ICP/TCP)...
Thank you very much, Oli
I just finished a job for a customer:wonderware in touch 7.1 + PLC Momentum 171CCC96030-IEC in a MACO DS controller. The Racksystem runs on Modbus+, the I/O mostly on Interbus S and some data are transfered
via Ethernet to increase the transfer rate. This is the first time I realized a controller with this setup. Now the customer asked me to show different signals like alarm messages in his office. I am thinking about using the ethernet to show little red, gree, and blue bulbs on his computer (in a small application). I never did this before and now I am wondering, if somebody knows how this can be done over the ethernet (ICP/TCP)...
Thank you very much, Oli