Hi Chaps,Could anyone explain how to configure DASABCIP in SMC to communicate with control Logix controller in the remote chassis.
My L75 is located in main chassis and PC is connected to EN2T in the remote chassis,both main and remote chassis are bridged by EN2TR.
Actually my problem is I cant point the controller in DASABCIP configuration since it is in another chassis.
SMC Config Used:
DASABCIP> New_PORT_CIP>NEW_ENB_CLX>NEW_BACKPLANE>NEW_L5000 CONTOLLER
where NEW_ENB_CLX is remote ethernet module connected to PC, NEW_BACKPLANE is remote backplane and NEW_L5000 CONTROLLER is the controller name in main chassis.I cant go beyond this!
Cheers!
My L75 is located in main chassis and PC is connected to EN2T in the remote chassis,both main and remote chassis are bridged by EN2TR.
Actually my problem is I cant point the controller in DASABCIP configuration since it is in another chassis.
SMC Config Used:
DASABCIP> New_PORT_CIP>NEW_ENB_CLX>NEW_BACKPLANE>NEW_L5000 CONTOLLER
where NEW_ENB_CLX is remote ethernet module connected to PC, NEW_BACKPLANE is remote backplane and NEW_L5000 CONTROLLER is the controller name in main chassis.I cant go beyond this!
Cheers!