Hi guys, I know it might be stupid questions for most of you, but it is unclear for me. I’m new in RLL programming and I’m trying to work my pump in certain intervals according to the temperature and humidity from analog inputs. I’m using DL-06 from Automation Direct with analog input expansion module. All is programmed in their directsoft32. Can you please have a look on my program if I’m on the right track? What I want to do is after temperature and humidity sensors send the right data; pump starts working in cycles (On/Off) until the sensors sees higher temperature. If so, pump will be on for longer time than in previous cycles. These cycles can be whole day or just few minutes depending on the temperature and humidity. I also have switches to turn on or off different zones, but one zone will be working all the time. By flipping the switch you can add another zone to current program, but it has still to read inputs from sensors. Please review attached file (if is not too much to ask) and please send me some hints. Your help is appreciated and welcomed. BTW I’m in your SETI group since yesterday as Pavouk.
Michael Suchan
Michael Suchan