rajubhaiya
Member
Guys help me?
Hope it works out but I can only see the zebra solution working on very non-demanding applications with only a few different kind of labels. And not very future proof.
It's just hard with just a PLC because it's really the wrong kind of tool for the job of handling a printer.
An industrial IT solution would be better than an automation solution.
Hi folks:
Recently I received a new software package for my ZT410 zebra printer, this package includes firmware for printer port (EIP) , AOP (add on profile) and some documents that explain how to setup the printer.
Setting up the whole thing is easy, in my case I will use 2D code (QR code), but using bar code is exactly the same.
The only you have to do is organize how your data is going to be printed, you have to use ZebraDesigner software to design your label and and send the label to be written on printer flash memory, then copy ascii character to your plc´s printer buffer then send data to your printer and voila.
See attached files.
Hi @Widelto,
Thank you for create the topic, the Zebra documentation is not so clear.
Please send me the Zebra firmware and informations aboult aplication in Ethernet/IP.
Did you already use another Zebra models with PLC like GT800 in ethernet?
Follow my email address,
[email protected]