Ron6259
Lifetime Supporting Member
Hello,
I have several SLC-500 based systems. The user interfaces are PanelView 2711-TC1 touchscreens with firmware revision 3. I purchased a Refurbished PanelView 2711-TC1 to replace a touchscreen that stop working. I have bought used touchscreens that work fine in the past. This touchscreen has firmware revision 2.
The 2711-TC1 touchscreens are connected to 1747 scanner modules. Whenever I select SLC-500 1747-SN in communications options in the panel view software it upgrades the PanelView application to require revision 3 firmware.
How can I upgrade the firmware in the PanelView to revision 3? I did not find the information on rockwellautomation.com website for updating the firmware for these screens.
I’ve have replaced some 2711-TC1 touchscreens with C-more touchscreens. I purchased the refurbished PanelView 2711-TC1 touchscreen to avoid modifying the PLC program at this time.
Thanks
I have several SLC-500 based systems. The user interfaces are PanelView 2711-TC1 touchscreens with firmware revision 3. I purchased a Refurbished PanelView 2711-TC1 to replace a touchscreen that stop working. I have bought used touchscreens that work fine in the past. This touchscreen has firmware revision 2.
The 2711-TC1 touchscreens are connected to 1747 scanner modules. Whenever I select SLC-500 1747-SN in communications options in the panel view software it upgrades the PanelView application to require revision 3 firmware.
How can I upgrade the firmware in the PanelView to revision 3? I did not find the information on rockwellautomation.com website for updating the firmware for these screens.
I’ve have replaced some 2711-TC1 touchscreens with C-more touchscreens. I purchased the refurbished PanelView 2711-TC1 touchscreen to avoid modifying the PLC program at this time.
Thanks