How to write equation in Proworx Nxt

Hello
as i am ref to one prog done in Quantum controller 113
i have seen it has math Equation . i have gone through HELP it is showinw EDIT Menu -> Insert Network Equation
but this Tab is not aviable in Proworx Nxt 2.20

Which version i should USE

Thanks
sandy

You must be on the first rung of an empty network in order to insert an equation. I, don't remeber if the CPU113xx can perform equations.

Sandy,
Equation networks are available in NxT 2.2.

When the controller selection is made when setting up your program under controller details you need to select the proper Exec. Cartridge (v2.xx) in order to allow equation nets.

Configuration-configuration-controller-change controller type-edit controller details.
By default it is v1.xx (no Eqn. nets)

Hope that helps,
mike

Thanks
i have changes confg. to 2.xx and now i can write Equations

How manu Registers i can configred currently i am using
4xxxxx - 1800 Registers

can i configured upto 2000 ?

Thanks
sandy

Is there any SORT function aviable in Proworx ?

like AB is having SRT function Block
or Some other method

Thanks
Sandy