SICK SIG200 Gateway Profinet

Holmux

Lifetime Supporting Member
H
Join Date
Oct 2013
Location
Aalborg
Posts
279
Hi

I am working on a project with 2 SICK SIG200 profinet gateways
My PLC is a 1512SP

I have the gateway mapped in the PLC network, allocated the memory area and it looks OK, I just need the last bit where I get the data into a tag.

I can't seem to get my head around the IO-Link data structure, is there anyone that have used these gateways and could give me a hint :)

/Holmux
 

Similar Topics

L
Question about SICK Safety Laser-scanner for robot arm
Hi I have a yaskawa gp7 robot arm which I am going to use for machine tending with a cnc mill. Is it a good idea to buy a SICK laser scanner for...
Replies
5
Views
235
bill4807
B
D
SICK AFM60a Saving Parameters to Non-Volatile Memory
Hi all, I have installed a SICK AFM60A-S4IB018x12 encoder to Allen-Bradley CompactLogix PLC and configured its parameters via AOI provided by...
Replies
0
Views
96
dirty_magic
D
F
Using CLV630 sick scanner with a micro850
I have a CLV630 scanner successfully communicating with a Micro850 controller (over Ethernet/IP) but I don't know how to convert my scan...
Replies
0
Views
821
Fraser
F
C
Banner , Sick , etc. Slot on Fork Sensors . Do they make them wider than 8.66 " ?
Banner , Sick , etc. Slot on Fork Sensors . Do they make them wider than 8.66 " ? Good Morning , I have product that is coming down the...
Replies
3
Views
1,029
dYoast
D
R
Restoring default IP address of Sick FX0-GENT
I've inadvertently tick the DHCP box in the sick software and uploaded this in the PLC (Sick FX0-GENT) and now i am unable to connect to it. Is...
Replies
1
Views
999
ronplc
R
Back
Top Bottom