[email protected]
Member
What is the proper format for an alarm trigger when setting up a panelview plus 1000 that is connected with a slc 500 with a 5/04 processor. This is an HMI that was added approx a year ago but never completed. The multistate indicators work fine but the alarms do not populate in the alarms screens. Multistate triggers are setup like this {::[slc_1]n60:14}
The slc program is set up to use bits as the trigger for the alarms. I've tried to set up my trigger in the HMI as follows'
{::[slc_1]b13:10/3}, but had no luck. I have also created and interger for this alarm to see if it would populate in the alarm screen, but have had no luck. Any help would be appreciated.
The slc program is set up to use bits as the trigger for the alarms. I've tried to set up my trigger in the HMI as follows'
{::[slc_1]b13:10/3}, but had no luck. I have also created and interger for this alarm to see if it would populate in the alarm screen, but have had no luck. Any help would be appreciated.