Hi all,
I have an ethernet network setup with a Mlogix 1500 controller and a 1761-net-eni module.I can download and upload programs to the controller with no problems. I am trying to set up the NET-ENI to send emails on conditions. The problem I am having is that the MSG instruction returns this error;
"remote host is not there, missing or shut down"(error hex 30) when I try to send the email string.(not a timeout error) Can you tell me what I am doing wrong? Here are my settings:
Ethernet network:
-computer address:192.168.000.001
-1761 NET-ENI address:192.168.0.10
-subnet mask of network:255.255.000.000
-subnet mask of NET-ENI:255.255.000.000
-Gateway of NET-ENI:192.168.000.001 (?)
-I use netzero dial-up which assigns a new IP address each time online.
-online EMail email server IP address:66.235.202.50 (not netzero)
Rslinx ethernet driver config shows;
192.168.000.001 = computer(rslinx)
192.168.000.010 = NET ENI
All other MSG instructions sent to ENI thru rslogix500 program for configuration works fine. It just won't find the online email server. I would appreciate any help you could give me.
Thanks,
I have an ethernet network setup with a Mlogix 1500 controller and a 1761-net-eni module.I can download and upload programs to the controller with no problems. I am trying to set up the NET-ENI to send emails on conditions. The problem I am having is that the MSG instruction returns this error;
"remote host is not there, missing or shut down"(error hex 30) when I try to send the email string.(not a timeout error) Can you tell me what I am doing wrong? Here are my settings:
Ethernet network:
-computer address:192.168.000.001
-1761 NET-ENI address:192.168.0.10
-subnet mask of network:255.255.000.000
-subnet mask of NET-ENI:255.255.000.000
-Gateway of NET-ENI:192.168.000.001 (?)
-I use netzero dial-up which assigns a new IP address each time online.
-online EMail email server IP address:66.235.202.50 (not netzero)
Rslinx ethernet driver config shows;
192.168.000.001 = computer(rslinx)
192.168.000.010 = NET ENI
All other MSG instructions sent to ENI thru rslogix500 program for configuration works fine. It just won't find the online email server. I would appreciate any help you could give me.
Thanks,