SaadJanjua
Member
Hy everyone, I have Parker DC Drive (590+). in ints manual there is mentioned about P3 port which is based on (RS-232) communication. I want to know that can we use this port P3 for communication with Parker HMI TSI8006.
Communication of Parker SSD 590+
- Thread starter SaadJanjua
- Start date
Similar Topics
Parker 590 drive to Siemens 300 over Profibus
Hi,
We are working now days to establish communication between Compact Logic PLC and Parker HPC Servo drive via Prosoft MVI69-GSC ASCII...
Hi all,
I have a studio 5000 project that incorporates a Rexroth Indradrive Cs servo amplifier, a Kistler Joiner, with a maXYmos measuring/control...
I am working with a remote rack with a 1771-ASB adapter, and inside Logix 5000 I am trying to find where it displays the status of each of the...
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
