My 1771-OFE analog output card was previously configured to Voltage output OFE1 (voltage version), all four channels are 0-10Volts corresponding to 0-4095. All channels are working normally. Recently, some machineries are dismantled, the four channels are free. I changed to 4-20mA OFE2(4-20mA version) and scale to 0-4095. But when N4:68 = 2048, the output got 20mA full scaled output. look like the full scale is 0-2048 instead of 0-4095, what is going on? For my understanding, the current output has nothing with DIPs setting at backplate of this board. Right?
Last edited: