Halo everybody,
need help. we have ET200 IM151 6es7 151 1ba02 0ab0 used with Profisave on Kuka robots. communication is DP. IM151 have everything ok no red just green lite, but each card on that module together with power supply card PM-E have red light SF. In on line HW config. we don't see nothing for PLC everithing are ok, also for ET200. we used two cabinet and in both are the same folts. in tird cabinet we have the same but config and rest card have everithing ok.
for mension we used PROFISAFE card on ET200 and they are in cabinet of Robot. Power supplay caming from main cabinet DP are ok diagnostic are ok.
Thank you for answer
need help. we have ET200 IM151 6es7 151 1ba02 0ab0 used with Profisave on Kuka robots. communication is DP. IM151 have everything ok no red just green lite, but each card on that module together with power supply card PM-E have red light SF. In on line HW config. we don't see nothing for PLC everithing are ok, also for ET200. we used two cabinet and in both are the same folts. in tird cabinet we have the same but config and rest card have everithing ok.
for mension we used PROFISAFE card on ET200 and they are in cabinet of Robot. Power supplay caming from main cabinet DP are ok diagnostic are ok.
Thank you for answer