sinanmoral
Member
Hello,
First I looked at Manuel and Plctalk but I did not find or maybe not understand.
How I can connect ''HTL / Push pull-24 volt encoder'' to the terminal of 1746-HSCE?
Encoder Model; DFV60B-22EZ0-S01- Sick..... (there are just 5 pins= 2 pins for Powers +Others A,B,Z)
Also, I see '' Ls,Com, Ls (5VDC),Ls(12 VDC) and Ls( 24vdc)'' on 1746-HSCE modul.
What is for them?
Can I connect '' A, B, Z pins of the encoder(HTL)'' to directly A, B, Z of 1746-HSCE?
The title is wrong and will be 1746 hsce
thanks in advance
First I looked at Manuel and Plctalk but I did not find or maybe not understand.
How I can connect ''HTL / Push pull-24 volt encoder'' to the terminal of 1746-HSCE?
Encoder Model; DFV60B-22EZ0-S01- Sick..... (there are just 5 pins= 2 pins for Powers +Others A,B,Z)
Also, I see '' Ls,Com, Ls (5VDC),Ls(12 VDC) and Ls( 24vdc)'' on 1746-HSCE modul.
What is for them?
Can I connect '' A, B, Z pins of the encoder(HTL)'' to directly A, B, Z of 1746-HSCE?
The title is wrong and will be 1746 hsce
thanks in advance
Last edited: