JeremyAdair87
Member
So I've been getting around something that is confusing me.
Attached are my notes.
I have a tag that I can change in an Panelview32. I found it on the other end inside my logix 5000 program, but I can't connect the dots.
The machine used to be connected to a logix 500 SLC and was updated.
The HMI is still referencing logix 500 tags, but is somehow ending up in the logix 5000 in some way.
I can get by on this project But I would really like to know what is going on.
How does someone make tags set up for a SLC end up in logix 5000??
In testing I have changed the Current_Part_number_selected tag in the HMI and see the value in From_pnlvu Change.
Cheers.
Attached are my notes.
I have a tag that I can change in an Panelview32. I found it on the other end inside my logix 5000 program, but I can't connect the dots.
The machine used to be connected to a logix 500 SLC and was updated.
The HMI is still referencing logix 500 tags, but is somehow ending up in the logix 5000 in some way.
I can get by on this project But I would really like to know what is going on.
How does someone make tags set up for a SLC end up in logix 5000??
In testing I have changed the Current_Part_number_selected tag in the HMI and see the value in From_pnlvu Change.
Cheers.