RockyLeafs
Member
Has anyone had any luck getting a Rockwell PLC (Compactlogix with Ethernet/IP) to communicate to a Toshiba TS3000 with Ethernet/IP.
I imported the EDS file, the IO says its ok (running) but not seeing any input/output change states between the PLC and robot controller.
I followed all the steps in the Fieldbus manual but no luck yet...
I imported the EDS file, the IO says its ok (running) but not seeing any input/output change states between the PLC and robot controller.
I followed all the steps in the Fieldbus manual but no luck yet...