Connecting SEW Movidrive with Indramat permanent magnet motor

Timosegeren

Member
T
Join Date
May 2020
Location
Hoeven
Posts
1
Hello everyone,

I'm new to the world of servos. And now I'm facing the next problem:
I have a SEW Movidrive MDX61B and an Indramat MAC071C permanent magnet motor. Can I connect both or do I need an Indramat drive for this motor?

Thank you
 

Similar Topics

T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
32
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
81
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
90
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
229
arpus4KM
A
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
149
JeffKiper
JeffKiper
Back
Top Bottom