AB round 8pin plug pin out

atvracer · Dec 30, 2015

im looking for the pin out for the ROUND 8PIN PLUG rs232 AND RS485 on a AB1100 and 1400

Im having issues with a RS485 project use pin 1 and 8 is that right? im using a home made cable i did order a 1763-nc01 plug but that will not be here till next week

thanks

Ken Roach · Dec 30, 2015

Yes, Pin 1 and Pin 8 are the RS485 data pins.

Pin 2 is data ground; if your RS485 device has a "data reference" or "data common", connect it to Pin 2.

If your RS485 device has no data reference and uses ground or the cable shield, connect Pin 2 to that.

Mickey · Dec 30, 2015

And here is a pretty picture.

atvracer · Dec 30, 2015

cool thanks this helps a lot

GaryS · Dec 31, 2015

That's not quite all
there is +24VDC and -24VDC as well as communications
I am not sure exactly what pins they are but it is used to power cables, converters and other devices.
If I get a chance I will see what I can find and post it later

GaryS · Dec 31, 2015

1747-C10 Cable Pinout

Here's the pin out for the 1747-C10 Cable

atvracer · Dec 31, 2015

hum on your pdf on pin 8 is 24+ im using pin 8 for A pin 1=B pin 2 ground ?

thanks

Mickey · Dec 31, 2015

atvracer said:
hum on your pdf on pin 8 is 24+ im using pin 8 for A pin 1=B pin 2 ground ?

thanks

That cable GaryS posted is not used with your ML1100 or ML1400. See pdf

atvracer · Dec 31, 2015

ok that make since

thanks man

AB round 8pin plug pin out

atvracer

Member

Ken Roach

Lifetime Supporting Member + Moderator

Mickey

Lifetime Supporting Member

atvracer

Member

GaryS

Member

GaryS

Member

atvracer

Member

Mickey

Lifetime Supporting Member

atvracer

Member

Similar Topics