Daviddon
Member
I have a problem with a Modicom TSX Micro PLC, it is fitted in a Mailing Machine that has been sent to us from another factory. After applying power to the machine the PLC display was flashing PRG and was not in run mode, whilst I was off shift someone has downloaded information on this model from the internet and has followed the instructions for this problem which was to press the reset button behind the battery, this was supposed to put the PLC back into run mode.......Now we have inputs and outputs displayed on the PLC but run and "ter" leds are flashing alternately. As we have no documentation, program/IO list or experience of this type of PLC we are all "****ing in the wind" at the moment. Oh and it's got to be running for an important visit this Friday, would really appreciate any help on this.
Regards, Dave.
Regards, Dave.