Programmer4
Member
HI,
I have studied the manual for this zero speed digital ouput relay contact. P558. The contact is suppost to close when the drive is at zero speed and I can see bit 10 at 1 on the hand held, but this contact does not close when reading it with an ohm meter. Can I get some instruction on how to set this up?
I have studied the manual for this zero speed digital ouput relay contact. P558. The contact is suppost to close when the drive is at zero speed and I can see bit 10 at 1 on the hand held, but this contact does not close when reading it with an ohm meter. Can I get some instruction on how to set this up?