What i am using:
Rack 1:
1,slc500 cpu 5/03 slot 0
2, 1747-sn scanner ser:b slot 1
3:16 pionts ac input slot 02
4:16 points ac input slot 3
5:16 points ac output slot 4
rack 2:
1, 1747-asb adapter ser:a slot 0
2,16 points ac output slot 1
3,16 points ac output slot 2
distance between two racks:6 ft
scanner setup:
Sw1:1 on, 2 on
scaned input words:32
scaned output words:32
interrupt service routine:0
m0 length:3300
m1 length:3300
g file length:3
g file configration:
Logical rack 0---group 0---1/2 rack
adapter din setting:
Sw1: 1-8 on,
sw2:1-7 on, 8 off
sw3:1 off,2-5 on,6 off,7-8 on
pc connceted to cpu,remote run,no fault
stadus:
Scanner comm light: Red flashing fault light: No light
asb light:comm light: Green flashing fault light: No light
display:ade
reading from program : M1:1.0/0=1
how to active scanner?
Anybody could help to find out where is the issue?
Thanks!
Rack 1:
1,slc500 cpu 5/03 slot 0
2, 1747-sn scanner ser:b slot 1
3:16 pionts ac input slot 02
4:16 points ac input slot 3
5:16 points ac output slot 4
rack 2:
1, 1747-asb adapter ser:a slot 0
2,16 points ac output slot 1
3,16 points ac output slot 2
distance between two racks:6 ft
scanner setup:
Sw1:1 on, 2 on
scaned input words:32
scaned output words:32
interrupt service routine:0
m0 length:3300
m1 length:3300
g file length:3
g file configration:
Logical rack 0---group 0---1/2 rack
adapter din setting:
Sw1: 1-8 on,
sw2:1-7 on, 8 off
sw3:1 off,2-5 on,6 off,7-8 on
pc connceted to cpu,remote run,no fault
stadus:
Scanner comm light: Red flashing fault light: No light
asb light:comm light: Green flashing fault light: No light
display:ade
reading from program : M1:1.0/0=1
how to active scanner?
Anybody could help to find out where is the issue?
Thanks!