Wheresmy10mm
Member
Hey all, first time posting. I have gotten a lot of great info from all of you in the past. I have searched the forums and google as much as possible and I still cannot connect to any processor with our 1747-UIC cable. It has worked in the past, using both the DH 485 UIC driver and the RS232 DF1 driver. We don't use this cable much, except when connecting to SLC 500 that only have an RJ45 port. At the moment, I am trying to connect to a 1747-L20C, using a Windows XP machine with RSLinx 3.73 and a Black generic 1747-UIC cable. I've made sure the laptops's com port properties are correct. When configuring using the Rs232 DF1 driver: Com port 6, (same as laptop), SLC CHO/Micro/Panelview (also tried 1770-KF3/1747-KE), baud rate 19200, Parity even, Error Checking CRC, Stop Bits 1, Full Duplex. Hit OK (Not Auto config). And then Node 0 found, node 1 not found. I updated Linx from 2.59 to 3.73, deleted the Harmony Files, and triple checked com port properties. For troubleshooting's sake I've tried to connect to a 1747-L20L and an SLC 5/03, with no luck. We have another cable that is supposed to be delivered tomorrow, but does anyone have any input. I'd be happy to provide any other info needed. Thanks