Paul351W
Member
Would a 1756-HYD02 module be able to control the swash plate angle on a hydraulic pump/motor equipped with LVDT feedback?
We have an application with dual direction swash plate motors that run in speed or torque control mode and I was curious if we could use the HYD02 module to control the swashplate angle and have an outer torque or speed loop in the PLC command the desired swashplate angle.
We have an application with dual direction swash plate motors that run in speed or torque control mode and I was curious if we could use the HYD02 module to control the swashplate angle and have an outer torque or speed loop in the PLC command the desired swashplate angle.