1756-M16E sercos card failure during firmware upgrade

drmarty

Member
D
Join Date
Jan 2019
Location
holland
Posts
5
Im having a problem with the sercos network during firmware upgrade. Im tryimg to flash my drives from 1.135< to 1.136.




When i'm using controlflash 15.01.00 and select my 2094-BM03 drive it doesnt continue with upgrading.


My 1756-M16E has 3 solid red lights, and all my drives in the sercos network stay in step 5.




Strangely enough im doing exact the same thing with other machines and i dont have any isues with that.


Any ideas?
 

Similar Topics

E
1756-ENxTR
Hey Guys, I thought I knew the answer to this, but after some looking I am starting to doubt myself. I thought the 1756-EN2TR would allow you to...
Replies
2
Views
93
tlf30
tlf30
A
How to determine major communication fault with AB 1756- Modules
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
Replies
3
Views
112
Ken Roach
Ken Roach
W
1756-L85E - 1756-RIO compatibility
We are in the process of converting our plants from PLC5 controllers and 1771 I/O into ControlLogix PLCs and Logix I/O. Up until now we used 1756...
Replies
1
Views
85
robertmee
R
D
1756-EN2TR Module not responding
Hello all, I have a 1756-EN2TR dual-port Ethernet IP Module attached to my 1756-L73 PLC. I currently have hazard symbols over both the top and...
Replies
9
Views
192
JunQ
J
R
1756-L71S
Hi all I have a ControlLogix 1756-L71SP that i want to use for general PLC applications, not safety. I am running Studio5000 v33, i can't...
Replies
2
Views
122
Revver
R
Back
Top Bottom