Dauge
Member
I am having issues locating the status codes and figuring out why I don't have any output from my analog output card. Here's the configuration as I have it.
1769-L35E with 2 remote flex racks with 1794-AENT/A
Both flex racks are identical. One of the 1794-OE12's work just fine but the other will not.
In troubleshooting I found that status bit 15 "fieldpoweroff" is blinking on and off. But I can't figure out why.
If anyone can be of assistance it would be greatly appreciated.
Thanks
Duane
1769-L35E with 2 remote flex racks with 1794-AENT/A
Both flex racks are identical. One of the 1794-OE12's work just fine but the other will not.
In troubleshooting I found that status bit 15 "fieldpoweroff" is blinking on and off. But I can't figure out why.
If anyone can be of assistance it would be greatly appreciated.
Thanks
Duane