Phrog30
Member
Does a prewired "swing arm" exist for the 5370 L2 controllers. I did a brief search and didn't see anything.
Thanks,
James
Thanks,
James
5370 L2 Prewired Terminal Block "Swing Arm"
- Thread starter Phrog30
- Start date
OkiePC
Lifetime Supporting Member
Maybe this is what you are looking for?
509747 - CompactLogix 5370 L2 Controller replacement parts
Access Level: Everyone
If you are looking for something like this:
http://ab.rockwellautomation.com/Connection-Devices/Bulletin-1492-IO-Wiring-Systems#/tab6
I don't know of any for Compactlogix.
509747 - CompactLogix 5370 L2 Controller replacement parts
Access Level: Everyone
If you are looking for something like this:
http://ab.rockwellautomation.com/Connection-Devices/Bulletin-1492-IO-Wiring-Systems#/tab6
I don't know of any for Compactlogix.
Last edited:
Similar Topics
Hello,
I have a COMPACTLOGIX 5370 and a PV800 (2711R-T7T) in a panel. When I power cycle the panel the PV800 display boots up before the PLC and...
Does anyone know how to synchronise the time between these two?
I had thought that the HMI could write a LINT (time/date in microsecronds) to the...
I am trying to find the EDS files for the following catalog numbers:
1769-L38ERMO Standard
1769-L38ERMOS Safety
1769-L36ERMO Standard...
We have some vendor supplied machinery that runs on a CompactLogix 5370 (1769-L24ER-EBFC1B, FW rev. 28.011) that wasn't communicating with the...
Hi all,
Hope all is well with you and yours.
Ok, so here is the deal.
I have a 1769-L33ER (5370) Controller with 31.x firmware loaded.
I can...