jseavers
Member
Does anyone know the part # for Allen Bradleys Point to Point cable? This cable is used for panelbuilder 32 to panelview Rs232. Thanks!!
A-B point to point cable
- Thread starter jseavers
- Start date
Mickey
Lifetime Supporting Member
Any straight thru RS232 cable ( 9 Pin) will do, For all standard PV.
Except the Micro 300 ( it takes a null-modem RS232 cable ( 9 pin)
Whats the Cat No. of your PV
Except the Micro 300 ( it takes a null-modem RS232 cable ( 9 pin)
Whats the Cat No. of your PV
Last edited:
Similar Topics
Anyone know off the top what the maximum cable length should be between a compact logix controller and some point I/O?
I have 10 meters in my...
Hi all,
I am planning on installing a AB 1794 point IO system using the ethernet 1794-AENT and 7 IO modules connected to a compactlogix L35E. The...
We are having issues with our viewpoint server randomly crashing and only loading the error page if anything at all. It lives on 3 servers all of...
Good morning, I have a question regarding some point I/O modules. We use 1734-IE2V modules to measure the tension of a fiber, but we have quite a...
Hi,
I have some problem with View Point which I'm using to manual control of conveyors. On begin when in network was only PLC and HMI View Point...