About the Brake Resistance select

zhoudq

Member
Z
Join Date
Jul 2011
Location
JiangSu Province
Posts
75
Hello everyone!
I need change a machine, use a Frequency AC drive and a brake resistance, .the AC drive model is 22A34P0N104(AB. PowerFlex 4）, but i not select brake resistance never. please give me some information or a example. Thank you!
 
Last edited:

Similar Topics

W
Brake Control Kinetix 5500
Hi all, I am upgrading a couple of 2094-BC01-M01 servos with 2198-H015-ERS. The original code uses MSG instructions to control (release, engage...
Replies
2
Views
90
DarrylR
D
A
VSD with safe torque off and two phase mechanical brake
We have an existing VSD where a three phase circuit breaker feeds the drive, and two phases also tee off to a contactor, which is energised to...
Replies
12
Views
1,547
ASF
A
M
High-Inertia Load VFD - Dynamic Brake Overheat!
Hey All, I've got a Vacon x4 VFD running in open-vector mode. It is spinning a heavy pin-mill wheel. It gets frequency reference from a PID...
2
Replies
20
Views
2,597
MaxK
M
L
AC brake interference
Hi Team, We have had an old VSD fail (15+ years old) & replaced it with a modern inverter. The brake on this motor is AC as opposed to a DC which...
2 3
Replies
41
Views
4,150
strantor
S
D
PLC for press brake
I have a old press brake that I want to retrofit a PLC to with a linear encoder on the Y axis and a stepper motor on X axis. Y Axis: I would...
Replies
11
Views
2,402
atc222
A
Back
Top Bottom