I've inhibited all of my input modules on my program while I'm testing at the office. All the digital input signals are mapped to their respective tags, and all of them are working as expected, except for the ones that are tied to Studio 5000's Alarm Digital instruction.
I've mapped these problematic inputs to their respective Alarm Digital instruction, with a rung for each input with goes to the ".In" for that tag of the ALARM_DIGITAL type. When I run run the controller with the input cars inhibited, non of the inputs are high, but i see the .In for all the digital alarm going high and then low ever second or so.
Again, the reason I think it must be something with the Alarm_Digital insturction is because all of the other inputs are not acting this way if they are tied to a different type of instruction.
The module that I've inhibited is a 1734-IB8/C if that makes any difference.
Thanks Guys.
I've mapped these problematic inputs to their respective Alarm Digital instruction, with a rung for each input with goes to the ".In" for that tag of the ALARM_DIGITAL type. When I run run the controller with the input cars inhibited, non of the inputs are high, but i see the .In for all the digital alarm going high and then low ever second or so.
Again, the reason I think it must be something with the Alarm_Digital insturction is because all of the other inputs are not acting this way if they are tied to a different type of instruction.
The module that I've inhibited is a 1734-IB8/C if that makes any difference.
Thanks Guys.