Allen Bradley 1336 Impact Drive

badmancan

Member
B
Join Date
Jan 2021
Location
Cluj-Napoca
Posts
7
Hello,

I am trying to run an encoderless motor with my Allen Bradley 1336 Impact Drive but I cannot get past the Vel Fdbk Loss F5048 error, even when I change parameter 150 to Encoderless.
Anyone with a little bit of experience using these drives?
 
Those drives prefer you to set that via the quick start and then running the autotune settings.

Edit: Also, isn't p64 the motor feedback setting? 150 is what.. data in?
 
Last edited:

Similar Topics

R
Looking for a rebuilt Allen Bradley 1336 Impact 250 Hp Drive
Good Morning , I have a customer that lost a Allen Bradley 1336 Impact drive last night. Allen Bradley does not build this drive anymore ...
Replies
6
Views
3,735
Phil Buchanan
Phil Buchanan
N
Password reset of Allen Bradley 1336 plus VFD
Does anyone know if its possible to "reset" or "change" the password of an old Allen Bradley "1336 PLUS" VFD without knowing the current pasword?
Replies
3
Views
8,286
nilpanch
N
D
Allen-Bradley 1336 Impact Parameter Limits
I am trying to set up one of these drives on a high speed test cell where the max speed is 14900rpm. Parameters 40 and 41 (Rev Speed Limit and...
Replies
8
Views
4,791
DickDV
D
D
Getting connected to Allen Bradley Ultra3000
Hi how's it going. Was just wondering if someone could help me out. Recently one of the guys over on the LinuxCNC forums put me onto getting an...
2
Replies
15
Views
203
plvlce
P
N
2707-NC5 Allen Bradley Cable Pinout
Hello, Does anyone have one of these cables and willing to open the case so I can see the cable connections inside? 2707-NC5 I have sourced the...
Replies
3
Views
84
Mickey
Mickey
Back
Top Bottom