We have used many AB VFDs, once installed, and under 480vc power, are commissioned via appropriate Drive Software, and network connectivity.
There currently is a simple job on our floor, where the electrician handed me strictly the 525 Keypad control interface, and a USB cable.
What are some of the basic ways to use my computer to view, and modify the parameter set in the 525 VFD control device?
We have the newest version of Logix 5000, and Designer 5000. CCW would be an option, but would require a few (Corporate IT hoops) to jump through to download to my PC.
Other than the USB connection, do we need to put 24vdc on the control unit?
I will read all of the instruction from the Rockwell web-site tomorrow AM, just looking for some jump-start instructions.
Thank you
There currently is a simple job on our floor, where the electrician handed me strictly the 525 Keypad control interface, and a USB cable.
What are some of the basic ways to use my computer to view, and modify the parameter set in the 525 VFD control device?
We have the newest version of Logix 5000, and Designer 5000. CCW would be an option, but would require a few (Corporate IT hoops) to jump through to download to my PC.
Other than the USB connection, do we need to put 24vdc on the control unit?
I will read all of the instruction from the Rockwell web-site tomorrow AM, just looking for some jump-start instructions.
Thank you