Allen-Bradley IMC-121

TheMayze

Member
T
Join Date
Sep 2016
Location
Preston
Posts
1
Hi Forum,

I am experiencing a problem with an Allen-Bradley IMC-121 module. The module is 'deselecting' the program file during normal operations.

The program file is still in the module, as I have to reselect it and then recover the system.

Any thoughts as to the cause?

Regards
Andy
 

Similar Topics

A
Allen Bradley AOI's and IMC Control
So I am controlling a process with a very large dead-time. Because of this I found that the AB IMC function block worked the best to control the...
Replies
0
Views
1,077
awaege
A
M
Please Help! Allen-Bradley IMC-S Compact Motion Controller set up
I bought an old Allen-Bradley IMC-S Compact Motion Controller,of which the catalog number is 4100-234-R, i must set it up like a working one,so it...
Replies
2
Views
2,953
mrzhao
M
E
Allen Bradley IMC "compact motion controler"
hey guys, i have IMC S class, the problem is it's power supply get damage every period of time, duiring this month we have changed 3 power supply...
Replies
5
Views
3,725
OkiePC
OkiePC
A
Allen Bradley IMC S/234 Connectors
Hi I would like to find out what type of connectors are used for the IMC S class servo controller. I am replacing a IMC controller with a...
Replies
4
Views
4,438
ajax
A
D
Getting connected to Allen Bradley Ultra3000
Hi how's it going. Was just wondering if someone could help me out. Recently one of the guys over on the LinuxCNC forums put me onto getting an...
Replies
11
Views
81
David2024
D
Back
Top Bottom