Looking to put a current transducer shunt on a line with the mV reading going directly to a PLC. Using the ABB S800 modules.
From what I understand though the current shunt reading is in milivolts.
The I/O modules I see have things like:
Does this "nominal input range" 0(2) - +10V mean the minimum input voltage it can take is 2V? And thus my current shunt won't work if input into this.
Does anyone familiar with this range of products know which I/O module I should be feeding mV current shunt readings into:
From what I understand though the current shunt reading is in milivolts.
The I/O modules I see have things like:
Does this "nominal input range" 0(2) - +10V mean the minimum input voltage it can take is 2V? And thus my current shunt won't work if input into this.
Does anyone familiar with this range of products know which I/O module I should be feeding mV current shunt readings into: