spaderkung
Member
I want transfer an existing MP377 12" key panel to a replacement. I don't have the original project. I tried to take a backup using Prosave without success connecting to it. Changed IP in the panel win menu, and could ping. Bad planning I did not bring MPI adapter.
But then I thought is prosave even necessary? Can I just backup to USB instead?
Edit: In the panel backup/restore menu there are no media options selectable, so no existing cards in it I suppose.
Found also the instructions from Siemens for backup, but I'm not sure how to put the key version into transfer mode, as there is no popup during power on. Under transfer settings, the Remote Control was checked.
Can there also be a problem that when it was first downloaded some checkbox had to be ticked for backup?
The replacement panel has not arrived yet so I don't know the details of that. For the original panel I noted this data:
6AV6 644-0BA01-2AX1
Image version: V01.00.04.00_01.55
Bootloader version/date 1.00 / 17.7.2007
Flashsize 128 Mb
Thanks in advance for solutions
But then I thought is prosave even necessary? Can I just backup to USB instead?
Edit: In the panel backup/restore menu there are no media options selectable, so no existing cards in it I suppose.
Found also the instructions from Siemens for backup, but I'm not sure how to put the key version into transfer mode, as there is no popup during power on. Under transfer settings, the Remote Control was checked.
Can there also be a problem that when it was first downloaded some checkbox had to be ticked for backup?
The replacement panel has not arrived yet so I don't know the details of that. For the original panel I noted this data:
6AV6 644-0BA01-2AX1
Image version: V01.00.04.00_01.55
Bootloader version/date 1.00 / 17.7.2007
Flashsize 128 Mb
Thanks in advance for solutions
Last edited: