Hi -
Recently, I upgraded the firmware on a PanelView Plus 1000 to V 5.10.10; I think it was V 4. This meant that I needed to update the .MER files. I used FactoryTalk View Studio V 7.00.00 to do this. With the PVP at V 5.10.10 and the .MER loaded, the program seems to function fine except for the barcode scanner used to input part numbers. I tried using UCON driver but have had no luck yet. Not sure if I am not setting up the driver correctly or if I have an incompatibility issue.
Recently, I upgraded the firmware on a PanelView Plus 1000 to V 5.10.10; I think it was V 4. This meant that I needed to update the .MER files. I used FactoryTalk View Studio V 7.00.00 to do this. With the PVP at V 5.10.10 and the .MER loaded, the program seems to function fine except for the barcode scanner used to input part numbers. I tried using UCON driver but have had no luck yet. Not sure if I am not setting up the driver correctly or if I have an incompatibility issue.