Beijer E Terminal vs GOT HMIs

exiled

Member
E
Join Date
Jun 2002
Location
England
Posts
131
Hi folks.
moving on from my last post about Beijer e terminals.

We've just had a machine delivered to site which has a GOT940 installed in it (forgive me if this number is wrong as this number is by memory).
We have ordered the software but its not come yet. (probaly not paid the bill)
My Q is
  1. what is the difference between a Beijer E terminal and the GOT
  2. How does the programming software differ from E Desisner if any
  3. Are they any good?
Many thanks in advance
 

Similar Topics

D
Citect V.6 and Beijer E410 + E700 terminal
Hi I would like to heare if any of you have experince with setting up communication betwen E410 and E700 (with ethernetcard) terminals to a Citect...
Replies
1
Views
4,007
Unregistered
U
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
188
NicoSz
N
M
Beijer E910T Panel Fault
Hi all, First post here, I hope I'm putting it in the right spot! I have an ancient Beijer E910T which went down today. Given the proximity to...
Replies
0
Views
319
Martmartmart
M
O
Beijer E1000 with ControlLogix V32 And Simulation
I am looking to upgrade a CompactLogix on V18 to an L83E on V32 which is currently using a Beijer E1151. Does anyone know if the E1151 is directly...
Replies
3
Views
666
parky
P
ndzied1
Beijer iX Developer with Rexroth L45 PLC?
Has anyone put together a combination of the Beijer iX Developer software and a Rexroth L54 controller over ethernet? Can't seem to get the...
Replies
2
Views
565
ndzied1
ndzied1
Back
Top Bottom