CompactLogix "I/O Not Responding" bit?

Micah_68

Member
M
Join Date
Jun 2013
Location
El Mirage, AZ
Posts
7
I have a 1769-L33ER with several Danfoss drives set up as generic Ethernet modules. When I unplug a drive from the network, the "I/O Not Responding" indicator in Logix5000 lights up and the little yellow "faulted" triangle appears in the I/O configuration tree. Does this information get passed to some system bits that I can monitor? I need to reset certain portions of the PLC logic and display on my HMI when a specific drive goes offline. Thank you for your help.
 

Similar Topics

Q
I/O modules not responding blinking on Compactlogix L32C
I have been having this error on the CPU Compactlogix L32Cwhich says that I/O are not responding . I checked in the minor faults and cleared...
Replies
6
Views
2,119
thefatcontroller
T
R
Compactlogix IO Not responding
I have a Compact logix L35E and a remote B&R X20B I/O system on a plant network that was working until we had to change the IP addressing because...
Replies
4
Views
2,168
Dravik
D
micky
CompactLogix I/O Not Responding
I have a remote rack that has progressively gotten worse in giving me "I/O Not Responding" errors. Started faulting every couple days to today...
Replies
10
Views
9,436
Geospark
Geospark
S
Compactlogix I/O not responding over Wi-Fi
Hi to everyone, I am using a compactlogix 1769-L35E Rev 13.34 with 8 remote i/o racks. All of the communications is done via wi-fi using the...
Replies
6
Views
3,165
Firejo
Firejo
C
FactoryTalk View Studio - Updating from MicroLogix to CompactLogix
Hello, I have a panelview plus that reads from 4 different PLC's. 2 of these used to be Micrologix PLC's and someone else went and updated them to...
Replies
3
Views
128
Jmeadows7676
Jmeadows7676
Back
Top Bottom