Configuring RSview 32 for redundant PLC5 system

srv

Member
S
Join Date
Aug 2010
Location
QATAR
Posts
109
Somebody please advise me how can configure RS view 32 OPC server for controlNet redundancy.Since both PLC-5 controller has different controlNet node address,how we can linked to the same graphics.
 

Similar Topics

K
Configuring Stratix 5400 to connect to a Stratix 5700
Greetings, I had an issue with a RIO rack 2 and IFM I/O Link dropping on my network. I would loose connection for a second or 2 then they would...
Replies
3
Views
109
harryting
H
T
HMS Anybus Bolt II Configuring in Logix
Hello all and happy Friday, I'm curious if anyone here has experience sending data over an Anybus Bolt II (HMS AWB6001-A) using a Compact Logix...
Replies
4
Views
814
EastSideSquirrel
E
D
Configuring OPTO22 IO in codesys
Hello everyone, I am looking for an easier way to configure all my IO for an OPTO22 PLC. I am developing in Codesys I have a GRV-EPIC-PR1 with a...
Replies
0
Views
604
dduquette2141
D
D
Configuring Modbus SST-SR4-CLX-RLL Scanner
Greetings to all. We have SST-SR4-CLX-RLL (Molex Modbus module) in remote backplane. The remote backplane, containing SST-SR4-CLX-RLL module, is...
Replies
0
Views
676
desa
D
H
Configuring m221 and wecon HMI modbus RTU
disclaimer- 1,no one in their right mind would pick this configuration but I want to try and get it working. 2, my MB knowledge is sketchy at...
Replies
5
Views
1,195
jschulze
J
Back
Top Bottom