Control Net Issue

sadanand_kulkarni

Member
S
Join Date
Dec 2005
Location
Pune
Posts
22
Hey guys,

I need an urgent help. I am setting up a control net network as per attached configuration. Can you please tell me how to configure the RS Linx Enterprise for the Panel View terminal in RS View Studio?

thanks,
Sadanand
 

Similar Topics

K
Control net issue
Hi everyone. Please help me. See attached picture is Rsnetwors for control net. Node 12 show: missing. I check cable connection is Ok. Control net...
Replies
4
Views
1,919
mike3475
M
D
[Logix] Intermittent comms issue (ethernet/ip) between Control and Compact Logix PLCs
Hi guys, I'm having an issue with a comms failure issue but I can't figure out the root cause. I've narrowed down the issue a good bit, and I'm...
2
Replies
19
Views
12,249
ASF
A
K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
73
kdean94
K
D
Lincoln Power Wave 455M Devicenet PLC control
Good day Forum Members I got a older Lincoln welder and hoping to make it work at our shop. Welder in question is the Lincoln Power Wave 455M...
Replies
4
Views
235
dextaca
D
P
PLC Ethernet or ENT2 Port for Machine Control
An outside contracting firm designed a machine for our company. There are several devices connected through Ethernet/IP. This includes a Panel...
Replies
4
Views
204
robertmee
R
Back
Top Bottom