Control Yamaha Servo Drive with Micrologix

irondesk40

Member
Join Date
Jan 2008
Location
nc
Posts
630
Has anyone had any experience with controlling a Yamaha Servo Drive with a Micrologix plc. hate to ask so many questions but have a lot of projects and this site is very helpful to me. I know the new stuff is designed to be run with a Compact Logix Plc with the AOI instructions but the machine i am working on alreay has the Micrologix 1400. I did it about 4 years ago and used a Automation Direct Sure Servo unit. I think it was a 750 watt Servo controller system and i used Modbus with Messaging. With no more of a move that it makes it has worked great but looking at making some modifications and we thought about changing the motor part out to a Yamaha unit and motor controlling a linear slide type setup to accomplish the mechanical modifications that has to be.
Thanks for any advice.
 

Similar Topics

Hi all, I am upgrading a couple of 2094-BC01-M01 servos with 2198-H015-ERS. The original code uses MSG instructions to control (release, engage...
Replies
2
Views
88
Hey there guys, I'm relatively new to PLC programming. I had a few basic classes in college but since then I have mainly been on the instrument...
Replies
3
Views
234
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
88
Hello everybody, I'm currently working on a project where I need to implement an IoT platform based on Microsoft Azure Cloud. Communication is...
Replies
3
Views
123
I’m attempt to establish a communication between two simulator M580 CPUs, using a READ_VAR, I have two vitalization Windows 10 in VMWare and each...
Replies
4
Views
180
Back
Top Bottom