Dear All ,
Is there a way by which i can co-relate the P,I,D values obtain in Rslogix 500 PID instruction into Rslogix 5000 PID instruction.
I have converted a application in Rslogix500 to Rslogix5000 and everything is ok except the PID .
My PID values in Rslogix 500 are as follows
1. Proportional gain Kc == 20
2. Reset Ti = 1.40
3. Rate Td == 0.07
Pls help me
Is there a way by which i can co-relate the P,I,D values obtain in Rslogix 500 PID instruction into Rslogix 5000 PID instruction.
I have converted a application in Rslogix500 to Rslogix5000 and everything is ok except the PID .
My PID values in Rslogix 500 are as follows
1. Proportional gain Kc == 20
2. Reset Ti = 1.40
3. Rate Td == 0.07
Pls help me