Hossamhegab
Member
Hello everyone.
I have a feedback from encoder to measure the speed of conveyor, if in need to control the speed of the conveyor to a preset speed in mm/s .the conveyor is driven by VFD and the reference speed is analog value from s7-1200 plc
The question is how to make the drive follow the preset speed and minimize the error .
I have a feedback from encoder to measure the speed of conveyor, if in need to control the speed of the conveyor to a preset speed in mm/s .the conveyor is driven by VFD and the reference speed is analog value from s7-1200 plc
The question is how to make the drive follow the preset speed and minimize the error .