Hi,
I am programming a blow moulding machine with 2 stations. So far I have the sequence done with function STEP ( and SNXT). How can I jump automatically to Step 1 when I press the "Cycle Stop" button.
At the very moment when I press cycle stop the current marker in the sequence stays. So when I go to Basic Position and press cycle START all gets mixed up because the cycle is not at Step 1
Copied from an example I use the work marker for each step:
Step 1 W100.01
Step 2 W100.02
aso.
Function
RSETA [W100.00 1 15]
doesnt work. Error message "Operand out of range."
Thanks for help.
Andy
I am programming a blow moulding machine with 2 stations. So far I have the sequence done with function STEP ( and SNXT). How can I jump automatically to Step 1 when I press the "Cycle Stop" button.
At the very moment when I press cycle stop the current marker in the sequence stays. So when I go to Basic Position and press cycle START all gets mixed up because the cycle is not at Step 1
Copied from an example I use the work marker for each step:
Step 1 W100.01
Step 2 W100.02
aso.
Function
RSETA [W100.00 1 15]
doesnt work. Error message "Operand out of range."
Thanks for help.
Andy