I've got a project which requires some Logix integration to a Danfoss device.
It is the controls part of an Integrated Technologic Sensorless Control (ITCS) VFD, which is attached to a Bell & Gossett pump, and just for fun is owned by the Xylem corporation.
The plan is to use a RTA Gateway to interface between the PLC and the Modbus RTU. The table below lays out the addressing. Anybody go down this road? The documentation is kinda strange, like the way every parameter is given a FC of 03, like they couldn't be bothered to type an 06 or 10.
http://documentlibrary.xylemapplied...blogs.dir/22/files/2019/12/BGDANFOSSFC102.pdf
It is the controls part of an Integrated Technologic Sensorless Control (ITCS) VFD, which is attached to a Bell & Gossett pump, and just for fun is owned by the Xylem corporation.
The plan is to use a RTA Gateway to interface between the PLC and the Modbus RTU. The table below lays out the addressing. Anybody go down this road? The documentation is kinda strange, like the way every parameter is given a FC of 03, like they couldn't be bothered to type an 06 or 10.
http://documentlibrary.xylemapplied...blogs.dir/22/files/2019/12/BGDANFOSSFC102.pdf