Do I need a 12v power source?

EdLarry

Member
E
Join Date
Mar 2013
Location
Mogadore
Posts
1
When communicating from a Idec PLC to a pc using the link adaptor, does power need to be applied? There is a place for a 12v power source on the side of the adaptor. It does appear that it may be only needed when using the loader.
 

Similar Topics

A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
2
Views
198
adam 1432
A
J
Need Ideas...
Decided to come to you all to see if any of you have any ideas on how to approach this issue. I have a 'pack' of product that drops. When that...
Replies
7
Views
334
OkiePC
OkiePC
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
179
TheCaptain2000
T
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
138
kreamsippycup
K
P
🔧🔌 New to Motor World! Need some guidance. 🔌🔧
I've got this 3-phase 575V motor that we're controlling with a VFD (Variable Frequency Drive), which has been quite the learning curve in itself...
Replies
10
Views
365
tripstuf2
T
Back
Top Bottom