aradhonline
Member
I m just learning and no industrial experiance...Please explain the concepts...
-----------| I:0.1 |--------------------( O:0.0 )-----
|
|
-----------| I:0.2 |--------------------( O:0.0 )-----
|
|
-----------| I:0.3 |--------------------( O:0.0 )-----
Micrologix 1000..
3 diffrent inputs-toggle- (XIC) and 3 output having same address!!!!
Online--- 1 and 2 input buttons are not working ..and 3 input is working...
My concept ...
On scanning first read all inputs and made the input datatable.if input 1 is true ..it condradicts with 2 nd rung..so not showing output..but why the third ring says no problem.??? even though after the last rung output update scanning starts from the begning right??? so it condraticts with first rung..but not happennig and 3rd works....please expalin......
Micrologix 1000..
-----------| I:0.1 |--------------------( O:0.0 )-----
|
|
-----------| I:0.2 |--------------------( O:0.0 )-----
|
|
-----------| I:0.3 |--------------------( O:0.0 )-----
Micrologix 1000..
3 diffrent inputs-toggle- (XIC) and 3 output having same address!!!!
Online--- 1 and 2 input buttons are not working ..and 3 input is working...
My concept ...
On scanning first read all inputs and made the input datatable.if input 1 is true ..it condradicts with 2 nd rung..so not showing output..but why the third ring says no problem.??? even though after the last rung output update scanning starts from the begning right??? so it condraticts with first rung..but not happennig and 3rd works....please expalin......
Micrologix 1000..