Ethernet IP Adress Mapping for Compact Logix

afeefabdussamed

Member
A
Join Date
Sep 2016
Location
Jeddah
Posts
24
Dear all

Can any one guide me for mapping in compact logix in RS Logix 5000 which I will be using MOXA MB Gate 5105 for converting Ethernet IP to Modbus TCP.I am confused in Mapping.
 

Similar Topics

fhervrylesestoso
iFM ASi Gateway AC1308 to AC1424 (DeviceNet to Ethernet)
Hello, It's been a while since I posted a question on this forum. We will convert iFM ASi gateway AC1308 (DeviceNet) into iFM ASi AC1424...
Replies
0
Views
50
fhervrylesestoso
fhervrylesestoso
K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
73
kdean94
K
L
FactoryTalk Linx Ethernet config error
Hello everyone I have the next issue with FactoryTalk Linx, when i configure the Ethernet driver and try to find the IP Address of the PLC Device...
Replies
0
Views
60
Lawrence Alcocer
L
S
A-B cable 1747-C13 for use with adaptor 1747-UIC... Just a regular ethernet patch cable?
Hi all I am working with a SLC 5/02 and having trouble getting online with it. I am using a 1747-UIC adaptor which allows for USB>serial and...
Replies
9
Views
149
Skidood
S
P
PG/PC ethernet connection
Hello guys i'm working with an s7 1200 plc with an ET 200S expansion module. The problem is that i can't find the plc when searching in the...
Replies
1
Views
121
RVaughan
RVaughan
Back
Top Bottom